UniFi Network 11 shows Matter and Thread devices, but doesn't run them

My take: Seeing smart-home devices in the same map as the rest of the network is overdue. The catch: the upgrade wipes your statistics history.
What to know
- Ubiquiti released UniFi Network 11 on October 12, 2026 (version 11.0.83). Matter is the smart-home standard shared by Apple, Google, Amazon and others; Thread, the low-power mesh network many Matter devices use. Network 11 lets you add a Matter-over-Thread device with its pairing code, then see its battery, firmware and signal strength, next to your IP devices on the topology map, with alerts for critical ones.
- UniFi works "alongside your existing Matter controllers", Ubiquiti writes: it watches, while Apple Home, Google Home or Home Assistant still run the devices. The release notes treat Thread border routers as other devices on your network (they mention HomePods and Apple TVs).
- The release notes ask for "a Cloud Gateway with UniFi OS 6.0.10 or newer", mDNS turned on, and IPv6 on the network that hosts the border routers. They list no models.
- Also new: WiFi Uplink, a nearby Wi-Fi network such as a phone hotspot as internet backup, only on the UDR-7, UDR-5G-Max, Express 7 and UCG-Industrial, not the original Dream Router. The limits: the database moves to PostgreSQL, existing statistics history is cleared, every site switches to the Zone-Based Firewall, and the upgrade can take up to 20 minutes.
Spotted in Self-Host Weekly.
What changes
If your smart home runs on Thread, a dying battery or a weak link now shows up where you already watch your network, without replacing your Matter app.
Before you upgrade, check that your console runs UniFi OS 6.0.10 or newer, take a backup, and write down the statistics you care about: they will not survive the move.
Source: Tom Hildebrand, Ubiquiti, “Introducing UniFi Network 11”, October 12, 2026
Drafted with Claude, Anthropic's AI, from my take. Reviewed and owned by me.